Specifications

71
show snmp
Purpose Used to display the SNMP configuration
entered on the switch.
Syntax show snmp
[community_string/trap_receiver]
Description This command will display the current
SNMP configuration on the switch.
Parameters
community_string − Displays all of the
community strings configured on the
switch. A community string is an alpha-
numeric string of up to 32 characters used
to authenticate management stations
wanting access to the switch’s SNMP agent.
trap_receiver − Displays all of the
trap_receiver IP addresses configured on
the switch. A trap receiver is a host on the
same subnet as the switch that can receive
SNMP trap messages.
Restrictions None.