Specifications

84
upload
Purpose Used to upload the current switch settings
or the switch history log to a TFTP server.
Syntax upload [configuration/log] <ipaddr>
<path_filename>
Description This command is used to upload either the
switch’s current settings or the switch’s
history log to a TFTP server.
Parameters
configuration − specifies that the switch’s
current settings will be uploaded to the
TFTP server.
log − specifies that the switch history log
will be uploaded to the TFTP server.
<ipaddr> − the IP address of the TFTP
server. The TFTP server must be on the
same IP subnet as the switch.
<path_filename> − specifies the location of
the switch configuration file on the TFTP
server. This file will be replaced by the
uploaded file from the switch.
Restrictions The TFTP server must be on the same IP
subnet as the switch. Only administrator-
level users can issue this command.
Example Usage:
DES7000:4@#upload configuration 10.48.74.121
c:\cfg\log.txt
Command: upload configuration 10.48.74.121
c:\cfg\log.txt
Connecting to server................... Done.
Upload configuration...................Done.
DES7000:4@#