Specifications

86
show packet ports
Purpose Used to display statistics about the packets
sent and received by the switch.
Syntax show packet ports <portlist>
Description This command is used to display statistics
about packets sent and received by ports
specified in the port list.
Parameters
<portlist> − specifies a range of ports to be
configured.
Restrictions None.
Example Usage:
To display the packets analysis for port 6 of mudule 2:
DES7000:4@#show packet port 2:6
Port number : 2:6
Frame Size Frame Counts Frames/sec Frame Type
Total Total/sec
------------ ------------ ---------- ---------- ------- --------
-
64 3275 10 RX Bytes 408973 1657
65-127 755 10 RX Frames 4395 19
128-255 316 1
256-511 145 0 TX Bytes 7918 178
512-1023 15 0 TX Frames 111 2
1024-1518 0 0
Unicast RX 152 1
Multicast RX 557 2
Broadcast RX 3686 16
Broadcast RX 4495 42