Specifications

87
show error ports
Purpose Used to display the error statistics for a
range of ports.
Syntax show error ports <portlist>
Description This command will display all of the packet
error statistics collected and logged by the
swtich for a given port list.
Parameters
<portlist> − specifies a range of ports to
be configured.
Restrictions None.
Example Usage:
To display the errors of the port 3 of module 1:
DES7000:4@# show error ports 1:3
RX Frames TX Frames
--------------- ----------------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collission 0
Drop Pkts 0 Collision 0