Specifications

Outgoing

This section describes steps to create policies for packets and services from

the Internal (LAN) network to the External (WAN) network.

Entering the Outgoing window:

Click Policy on the left hand side menu bar, then click Outgoing under it. A

window will appear with a table displaying currently defined Outgoing

policies.

The fields in the Outgoing window are:

! Source: Source network addresses that are specified in the

Internal section of Address menu, or all the Internal (LAN)

network addresses.

! Destination: Destination network addresses that are specified

in the External section of the Address menu, or all the External

(WAN) network addresses.

! Service: Specify services provided by external network servers.

! Action: Control actions to permit or reject/deny packets from

internal networks to external network travelling through the

Firewall.

! Option: Specify the monitoring functions on packets from internal

networks to external networks travelling through the Firewall.

Configure: Modify settings.

Move: This sets the priority of the policies, number 1 being the

highest priority.