Information in this document is subject to change without notice. Reproduction in any manner whatsoever, without the written permission of D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Table of Contents Table of Contents ................................................................................................................................................................. iii Intended Readers .............................................................................................................................................................. v Typographical Conventions ............................
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Areas of the User Interface ......................................................................................................................................... 34 Web Pages ................................................................................................................................................................. 35 Appendix A – Technical Specifications .....................................................
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Intended Readers Intended Readers Typographical Conventions Notes, Notices, and Cautions Safety Instructions General Precautions for Rack-Mountable Products Protecting Against Electrostatic Discharge The DGS-1510 Series Hardware Installation Guide contains information about the configuration and management of the switch. This manual is intended for network administrators familiar with network management concepts and terminology.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide NOTICE: A notice indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A caution indicates a potential for property damage, personal injury, or death. Safety Instructions Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide o 115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as South Korea and Taiwan o 100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan o 230 V/50 Hz in most of Europe, the Middle East, and the Far East • Also, be sure that attached devices are electrically rated to operate with the power available in your location. • Use only approved power cable(s).
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide • Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack. • Always load the rack from the bottom up, and load the heaviest item in the rack first.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide 1. Introduction Switch Description Package Contents Features Front-Panel Components Rear Panel Components Side Panel Components This Hardware Installation Guide is a detailed document explaining information about the hardware installation, configuration, specifications, guidelines, and maintenance of a D-Link switch. Switch Description The DGS-1510 Series is D-Link’s next generation SmartPro Switch.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Features The list of features below highlights the significant features of the Switch. • Supports Virtual Stacking. D-Link Single IP Management (SIM). • Supports Physical Stacking, using the SFP+ ports with 40G (Full Duplex) in topologies Linear and Ring. • Supports a 16K MAC address table. • Supports Flow Control (802.3x) in full-duplex compliant.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide • Supports Port-based Network Access Control (PNAC) better known as 802.1X. This feature includes Local and RADIUS databasis, Port-based Access Control, and MAC-based Access Control (MAC). • Supports Web-based Access Control (WAC). • Supports Japanese Web-based Access Control (JWAC). • Supports Guest VLAN. • Supports 15 User Account Privilege Levels. • Supports Compound Authentication.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Figure 1–2 Front panel view of a DGS-1510-28 Switch Figure 1–3 Front panel view of a DGS-1510-28P Switch Figure 1–4 Front panel view of a DGS-1510-52 Switch Ports The Type and Number of ports available on the Switch are listed out below: • • • • DGS-1510-20: o Sixteen Copper Ports (10BASE-T/100BASE-TX/1000BASE-T), o Two SFP Ports (1000BASE), o Two Dual Speed SFP+ Ports (1000BASE/10GBASE), o One Console Port (RJ-45),
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide LED Indicators The Switch’s front panel presents LED indicators for Power, Console, Master (Stack Control), Stack ID and Link/Act indicators for all the ports. The DGS-1510-28P switches are equipt with an additional PoE light, to indication whether the ports are running in Power over Ethernet mode.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide A separate table below describes LED indicators in more detail. LED Description Power This LED will light green after powering the Switch on to indicate the ready state of the device. The indicator is dark when the Switch is no longer receiving power (i.e. powered off). Console This LED will blink green during the Power-On Self Test (POST). When the POST is finished, the LED goes dark.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Figure 1–9 Rear panel view of a DGS-1510-20 Switch Figure 1–10 Rear panel view of a DGS-1510-28 Switch Figure 1–11 Rear panel view of a DGS-1510-28P Switch Figure 1–12 Rear panel view of a DGS-1510-52 Switch The AC power connector is a standard three-pronged connector that supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord into a power outlet.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Figure 1–13 Side panels view of a DGS-1510-20 Switch Figure 1–14 Side panels view of a DGS-1510-28 Switch Figure 1–15 Side panels view of a DGS-1510-28P Switch Figure 1–16 Side panels view of a DGS-1510-52 Switch Smart Fans The DGS-1510 Series Switches includes smart fans that will automatically change their speed depending on the internal temperature detected by the sensors built-in the Switch’s hardware.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide • • DGS-1510-28P: When the internal temperature, detected by the sensor, rises above 42°C, the fan will automatically change to the high speed. When the internal temperature, detected by the sensor, falls below 39°C, the fan will automatically change to the low speed. DGS-1510-52: When the internal temperature, detected by the sensor, rises above 47°C, the fan will automatically change to the high speed.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide 2. Installation Installation Guidelines Power On (AC Power) Installation Guidelines Please follow these guidelines for setting up the Switch: • Install the Switch on a sturdy, level surface that can support at least 3kg (6.6lb). Do not place heavy objects on the Switch. • The power outlet should be within 1.82 meters (6 feet) of the Switch.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Attaching Brackets to a Switch for Rack Mounting The Switch is mounted to a standard 19" rack using mounting brackets. Use the following diagrams as a guide. Figure 2–2 Attach mounting brackets to the Switch Fasten the mounting brackets to the Switch using the screws provided. With the brackets attached securely, the Switch can be mounted in a standard rack, as shown below.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide CAUTION: Installing systems in a rack without the front and side stabilizers installed could cause the rack to tip over, potentially resulting in bodily injury under certain circumstances. Therefore, always install the stabilizers before installing components in the rack. After installing components in a rack, do not pull more than one component out of the rack on its slide assemblies at one time.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Power Failure (AC Power) In the event of a power failure, just as a precaution, unplug the power cord from the Switch. After the power returns, plug the power cord back into the power soket of the Switch. Installing Power Cord Clip To prevent accidental removal of the AC power cord, it is recommended to install the power cord clip together with the power cord. 1.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Figure 2-7 Slide the Retainer through the Tie Wrap 4. Circle the tie of the Retainer around the power cord and into the locker of the Retainer. Figure 2-8 Circle around the power cord 5. Fasten the tie of the Retainer until the power cord is secured.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Figure 2-9 Secure the power cord 23
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide 3. Connecting the Switch Switch to End Node Switch to another Switch Connect to a Network Backbone or Server Switch to End Node An End Node can be any networking device, plugged into any of the networking ports of the Switch, where data transmission ends. Typical end nodes are computers.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Figure 3–2 Switch to Switch Connection Connect to a Network Backbone or Server The Combo Copper/SFP ports are ideal for connecting a network backbone, server or server farm to the Switch. The copper ports operate at a speed of 10/100/1000Mbps in half-duplex or full-duplex mode. The fiber-optic ports can operate at both 100/1000Mbps in full-duplex mode. The Link LED turns green when a connection is made.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide 4. Introduction to Switch Management Management Options Connecting the Console Port SNMP Settings Management Options This Switch can be managed, out-of-band, through the console port on the front panel or in-band using Telnet. Alternatively, the web-based management can be used, accessible through a web browser.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide a. The Bits per second should be 115200 baud. b. The Data bits should be 8. c. The Parity should be None. d. The Stop bits should be 1. e. The Flow control should be None. Figure 4-1 Hyperterminal Connection Properties 4. Now the Switch can be turned on and access to the Switch’s CLI will be available. NOTE: Access to the console port can be made at any time while the Switch is on.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Boot Procedure V1.00.004 ------------------------------------------------------------------------------Power On Self Test ........................................ MAC Address H/W Version 100 % : 00-01-02-03-04-00 : A1 Please Wait, Loading V1.00.010 Runtime Image .............. UART init ................................................. Starting runtime image Device Discovery ..........................................
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide By default, there are no user accounts configured on this Switch. To create a user account, enter the following commands. Switch> enable Switch# configure terminal Switch(config)# username nick password pass Switch(config)# username nick privilege 15 Switch(config)# line console Switch(config-line)# login local Switch(config-line)# In the above example, 1. We accessed the Privileged EXEC Mode by entering the command enable. 2.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Switch> show ip interface Interface vlan1 is enabled, Link status is down IP Address is 10.90.90.90/8 (Manual) ARP timeout is 20 minutes. Proxy ARP is disabled IP Local Proxy ARP is disabled gratuitous-send is disabled, interval is 0 seconds Total Entries: 1 Switch> In the above example, the command show ip interface is used to display information about the IP interfaces created on this Switch.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide The Switch supports SNMP versions 1, 2c, and 3. The administrator may specify which SNMP version to use to monitor and control the Switch. The three SNMP versions vary in the level of security provided between the management station and the network device. In SNMPv1 and SNMPv2, user authentication is accomplished using 'community strings', which function like passwords.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide D-Link Network Assistant (DNA) The D-Link Network Assistant (DNA), included in the installation CD, is a program that allows administrators to quickly discover all D-Link Switches and D-Link Discover Protocol (DDP) supported devices that are in the same subnet as the management computer to collect traps and log messages and provide quick access to basic configurations of the switch.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide 5. Web-based Switch Configuration Introduction Logging onto the Web Manager Web-based User Interface Introduction Most software functions of the Switch can be managed, configured, and monitored via the embedded Web-based (HTML) interface. Manage the Switch from remote stations anywhere on the network through a standard browser, such as Internet Explorer (version 5.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Web-based User Interface The user interface provides access to various Switch configuration and management windows, it allows the user to view performance statistics, and permits graphical monitoring of the system status. Areas of the User Interface The figure below shows the user interface. Three distinct areas divide the user interface, as described in the table.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Web Pages When connecting to the management mode of the Switch with a Web browser, a login screen is displayed. Enter a user name and password to access the Switch's management mode. Below is a list of the main folders available in the Web interface: System In this section the user will be able to configure features regarding the Switch’s configuration.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Appendix A – Technical Specifications General Feature Standards Detailed Description IEEE 802.1AB Link Layer Discovery Protocol. IEEE 802.1D-2004 Spanning Tree Protocol. IEEE 802.1p Priority Queues. IEEE 802.1Q-2005 Virtual LAN. IEEE 802.1S Multiple Spanning Tree Protocol. IEEE 802.1W Rapid Spanning Tree Protocol. IEEE 802.1X Port-based Authentication. IEEE 802.3i 10BASE-T Ethernet. IEEE 802.3u 100BASE-TX Fast Ethernet.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Physical and Environmental Feature Detailed Description Internal Power Supply DGS-1510-20: 100-240 VAC, 50/60 Hz, 24 Watt. DGS-1510-28: 100-240 VAC, 50/60 Hz, 30 Watt. DGS-1510-28P: 100-240 VAC, 50/60 Hz, 253 Watt. DGS-1510-52: 100-240 VAC, 50/60 Hz, 54 Watt. Fans The IC Sensor detects the temperature on the switch automatically, and adjusts the speed.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide DGS-1510-28P: 243090.6950 Hours DGS-1510-52: 433434.1606 Hours EMI/EMC; Test Reports CE Class A, FCC Class A, VCCI Report Class A, C-Tick Report Class A, BSMI, CCC Safety Certifications and Test Reports UL/CSA 60950-1, IEC 60950-1:2001, BSMI Performance Feature Detailed Description Transmission Method Store-and-forward. Packet Buffer DGS-1510-20/28/28P: 1.5 Mbytes per device. DGS-1510-52: 3 MBytes per device.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Console Fan Stacking ID Light off Power off. Solid Light Console on. Light off Console off. Green Solid Light Diagnostics pass. Normal operation. Red Solid Light Fan failure. Green Capable 1 – 6, H, h, The box ID is assigned either by user E, G. (static mode) or by the system (automatic mode). When the box become a primary master, the 7 segment works as bi-function.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide transmission of data occurring at 10/100Mbps. PoE Mode (Only DGS-1510-28P) LED per SFP Port Link/Act LED per SFP+ Port Link/Act Off Light off No link. Green Solid Light Power feeding. Orange Solid Light Error Condition. Off Light Off No Power feeding. Green Solid Light When there is a secure connection (or link) to 1000Mbps Ethernet device at any of the ports.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide SFP Ports • IEEE 802.3af compliance (DGS-1510-28P) • IEEE 802.3at compliance (DGS-1510-28P) Compliant with the following standards: • IEEE 802.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide DDM), 20km, TX: 1270nm, RX: 1330nm) • DEM-436XT-BXD (10GBASE-LR BiDi SFP+ Transceiver (w/o DDM), 20km, TX: 1330nm, RX: 1270nm) SFP+ Direct Attached Cables (DAC) Supported: PoE Ports • DEM-CB100S-10-GbE (SFP+, 1m, Direct Attach Cable), for stacking. • DEM-CB300S-10-GbE (SFP+, 3m Direct Attach Cable), for stacking. • DEM-CB700S-10-GbE (SFP+, 7m Direct Attach Cable), for stacking. 1. Supports IEEE 802.3af PoE and IEEE 802.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Appendix B – Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagrams and tables show the standard RJ-45 connector and their pin assignments.
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Console Cable When connecting the Switch to a PC, a Console cable is necessary. The following diagrams and tables show the standard Console-to-DJ-45 receptacle/connector and their pin assignments.
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: • • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Tech Support Technical Support You can find software updates and user documentation on the DLink website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the service period, and warranty confirmation service, during the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Technical Support United Kingdom (Mon-Fri) Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am – 05.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) €0.05ppm peak, €0.045ppm off peak Times Internet http://dlink.com Technische Unterstützung Deutschland: Österreich: Schweiz: Web: http://dlink.
Assistance technique Assistance technique D-Link sur internet : http://dlink.com Assistance technique D-Link par téléphone : 01 76 54 84 17 Du lundi au vendredi de 9h à 19h (hors jours fériés) Asistencia Técnica Asistencia Técnica Telefónica de D-Link: +34 902 30 45 45 0,067 €/min De Lunes a Viernes de 9:00 a 19:00 http://dlink.com Supporto tecnico Supporto Tecnico dal lunedì al venerdì dalle ore 9.00 alle ore 19.00 con orario continuato Telefono: 02 87366396 http://dlink.
Pomoc techniczna Telefoniczna pomoc techniczna firmy D-Link: 0 801 022 021 Pomoc techniczna firmy D-Link świadczona przez Internet: http://dlink.com Technická podpora Web: http://dlink.com E-mail: support@dlink.cz Telefon ČR: +420 211 151 640 nebo SK: +421 (0)692 147 110 Telefonická podpora je v provozu: PO - PÁ od 09:00 do 17:00 Volání je zpoplatněno dle příslušných tarifů Vašeho operátora. Technikai Támogatás Tel. : 06 1 461-3001 Fax : 06 1 461-3004 Land Line 14,99 HUG/min - Mobile 49.
Teknistä tukea asiakkaille Suomessa: Internetin kautta : http://dlink.com Arkisin klo. 09:00 - 18: 00 Numerosta : 0200-555 57 Teknisk Support D-Link Teknisk Support via Internet: http://dlink.com D-Link Teknisk Support via telefon: 0770-33 00 35 Vardagar 08:00 - 17:00 Assistência Técnica Assistência Técnica da D-Link na Internet: http://dlink.com e-mail: soporte@dlink.es Τεχνική Υποστήριξη D-Link Hellas Support Center http://dlink.com Καλύμνου 12, 112 51, Αθήνα Τηλ. 213 0020353 (Δευτέρα - Παρασκευή, 09.
Tehnička podrška Hvala vam na odabiru D-Link proizvoda. Za dodatne informacije, podršku i upute za korištenje uređaja, molimo vas da posjetite D-Link internetsku stranicu na www.dlink.eu http://dlink.com Tehnična podpora Zahvaljujemo se vam, ker ste izbrali D-Link proizvod. Za vse nadaljnje informacije, podporo ter navodila za uporabo prosimo obiščite D-Link - ovo spletno stran www.dlink.eu http://dlink.com Suport tehnic Vă mulţumim pentru alegerea produselor D-Link.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: Tel: 1300-766-868 24/7 Technical Support Web: http://www.dlink.com.au E-mail: support@dlink.com.au India: Tel: +91-832-2856000 Toll Free 1800-233-0000 Web: www.dlink.co.in E-Mail: helpdesk@dlink.co.in Singapore, Thailand, Indonesia, Malaysia, Philippines, Vietnam: Singapore - www.dlink.com.sg Thailand - www.dlink.co.th Indonesia - www.dlink.co.id Malaysia - www.dlink.com.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Iran Unit 5, 5th Floor, No. 20, 17th Alley , Bokharest St. , Argentine Sq. , Tehran IRAN Postal Code : 1513833817 Tel: +98-21-88880918,19 +98-21-88706653,54 General Inquiries: info.ir@dlink-me.com Tech Support: support.ir@dlink-me.com Morocco M.I.T.C Route de Nouaceur angle RS et CT 1029 Bureau N° 312 ET 337 Casablanca , Maroc Phone : +212 663 72 73 24 Email: support.na@dlink-me.
Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: 8-800-700-5465 Техническая поддержка через Интернет: http://www.dlink.ru e-mail: support@dlink.ru Офисы Россия 129626 г. Москва Графский пер., 14 Тел.: +7 (495) 744-0099 Украина, 04080 г.
SOPORTE TÉCNICO Usted puede encontrar actualizaciones de softwares o firmwares y documentación para usuarios a través de nuestro sitio www.dlinkla.
Suporte Técnico Caso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link. Acesse o site: www.dlink.com.
D-Link 友訊科技 台灣分公司 技術支援資訊 如果您還有任何本使用手冊無法協助您解決的產品相關問題,台灣 地區用戶可以透過我們的網站、電子郵件或電話等方式與D-Link台灣 地區技術支援工程師聯絡。 D-Link 免付費技術諮詢專線 0800-002-615 手機付費電話 (02)6600-0123#8715 服務時間:週一至週五,早上9:00到晚上9:00 (不含周六、日及國定假日) 網 站:http://www.dlink.com.tw 電子郵件:dssqa_service@dlink.com.tw 如果您是台灣地區以外的用戶,請參考D-Link網站全球各地 分公司的聯絡資訊以取得相關支援服務。 產品保固期限、台灣區維修據點查詢,請參考以下網頁說明: http://www.dlink.com.
Dukungan Teknis Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Dukungan Teknis D-Link melalui telepon: Tel: +62-21-5731610 Dukungan Teknis D-Link melalui Internet: Email : support@dlink.co.id Website : http://support.dlink.co.
Technical Support この度は弊社製品をお買い上げいただき、誠にありがとうご ざいます。 下記弊社 Web サイトからユーザ登録及び新製品登録を 行っていただき、ダウンロードサービスにて サポート情報、ファームウェア、ユーザマニュアルを ダウンロードすることができます。 ディーリンクジャパン Web サイト URL:http://www.dlink-jp.
技术支持 辦公地址:北京市朝陽區將台路5號院5號樓 郵編:100016 技術支持中心電話:400-629-6688 技術支持中心傳真:(028)-61317620 各地維修中心地址請登陸官方網站查詢 網址:http://www.dlink.com.cn 400電話工作時間:工作日9:00-19:00;節假日9:00-18:00.
Registration Card All Countries and Regions Excluding USA Print, type or use block letters. Your name: Mr./Ms_____________________________________________________________________________ Organization: ________________________________________________ Dept.