Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
109
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to create TACACS+ server hosts before it can be associated with the TACACS+
server group using the server command.
Example
This example shows how to create two TACACS+ server hosts with the different IP addresses.
Switch#configure terminal
Switch(config)# tacacs-server host 172.19.10.100 port 1500 timeout 8 key ABCDE
Switch(config)# tacacs-server host 172.19.122.3 port 1600 timeout 3 key ABCDE
Switch(config)#
8-26 show radius statistics
This command is used to display RADIUS statistics for accounting and authentication packets.
show radius statistics
Parameters
None.
Default
None.
Command Mode
Privilege EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display statistics counters related to servers.
Example
This example shows how to display the server related statistics counters.