Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
111
of a Response, a timeout or retransmission.
Timeouts
The number of timeouts to this server. After a timeout the client may
retry to the same server, send to a different server, or give up. A retry
to the same server is counted as a retransmit as well as a timeout. A
send to a different server is counted as a Request as well as a timeout.
Unknown Types
The number of RADIUS packets of unknown type which were received
from this server.
Packets Dropped
The number of RADIUS packets of which were received from this
server and dropped for some other reason.
8-27 show tacacs statistics
This command is used to display the interoperation condition with each TACACS+ server.
show tacacs statistics
Parameters
None.
Default
None.
Command Mode
Privilege EXEC Mode or and configuration mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display statistics counters related to servers.
Example
This example shows how to display the server related statistics counters.
Switch# show tacacs statistics
TACACS+ Server: 172.19.192.80/49, State is UP
Socket Opens: 0
Socket Closes: 0
Total Packets Sent: 0
Total Packets Recv: 0
Reference Count: 0
Display Parameters
TACACS+ Server
IP address of the TACACS+ server.
Socket Opens
Number of successful TCP socket connections to the TACACS+
server.
Socket Closes
Number of successfully closed TCP socket attempts.