Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
118
Switch#show arp
S - Static Entry
IP Address Hardware Addr IP Interface Age (min)
----------------- ----------------- ------------- ---------------
S 10.31.7.19 08-00-09-00-18-34 vlan1 forever
10.90.90.90 00-01-02-03-04-00 vlan1 forever
Total Entries: 2
Switch#
9-8 show arp timeout
This command is used to display the aging time of Address Resolution Protocol (ARP) cache.
show arp timeout [interface INTERFACE-ID]
Parameters
INTERFACE-ID
Specifies the interface ID.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the configured ARP aging time.
Example
This example shows how to display the ARP aging time.
Switch#show arp timeout
Interface Timeout (minutes)
------------ -----------------
vlan1 60
------------ -----------------
Total Entries:1
Switch#
9-9 show ip interface
This command is used to display the IP interface information.