Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
139
Example
This example shows how to display error log information.
Switch# debug show error log
# debug log: 1
# level: fatal
# clock: 10000ms
# time : 2013/09/11 13:00:00
====================== SOFTWARE FATAL ERROR =======================
Invalid mutex handle : 806D6480
Current TASK : bcmARL.0
------------------------- TASK STACKTRACE ------------------------
->802ACE98
->8018C814
->8028FF44
->8028352C
->801D703C
->8013B8A4
->802AE754
->802A5E0C
->802A5D6C
**************************************************************************
# debug log: 2
# level: fatal
# clock: 10000ms
# time : 2013/09/11 15:00:00
====================== SOFTWARE FATAL ERROR =======================
CLI_UTL_AllocateMemory Fail!
Current TASK : CLI
------------------------- TASK STACKTRACE ------------------------
->802ACE98
->802B4498
->802B4B00
->802BD140
->802BCB08
Total Log : 2
<Output truncated>
13-10 debug show tech-support
This command is used to display the information required by technical support personnel.
debug show tech-support
Parameters