Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
140
None.
Default
None.
Command Mode
Privileged EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to display technical support information. The technical support information is used to
collect the Switch’s information needed by the engineers to troubleshoot or analyze a problem.
Example
This example shows how to display technical support information of all the modules.
Switch# debug show tech-support
#-------------------------------------------------------------------------------
# DGS-1510-28P Gigabit Ethernet SmartPro Switch
# Technical Support Information
#
# Firmware: Build 1.00.016
# Copyright(C) 2014 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------------------
******************** Basic System Information ********************
[SYS 2000-1-1 08:25:57]
Boot Time : 1 Jan 2000 00:00:00
RTC Time : 2000/01/01 08:25:57
Boot PROM Version : Build 1.00.006
Firmware Version : Build 1.00.016
Hardware Version : A1
MAC Address : 00-01-02-03-04-00
MAC Address Number : 65535
[STACKING 2000-1-1 08:25:57]
#Topology Information
Stable Topology:
My Box ID : 1 Role : Master
Box Cnt : 1 Topology Type : Duplex Chain
Unit Prio- Device Runtime Stacking
ID rity Role MAC Type option version version
----- ---- ------- ----------------- ---------- ------ --------- -------
1 32 32 Master 00-01-02-03-04-00 DGS-1510-28P 0x0001 1.00.016 2.0.1
2 NOT EXIST
3 NOT EXIST
4 NOT EXIST