Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
169
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the effective setting of the trust relay information option function.
Example
This example shows how to use this command. Note that the display output lists the interfaces that are
configured to be trusted sources.
Switch# show ip dhcp relay information trusted-sources
List of trusted sources of relay agent information option:
vlan100 vlan200 vlan300 vlan400
vlan500
Total Entries: 5
Switch#
This example shows how to display when all interfaces are trusted sources. Note that the display output
does not list the individual interfaces.
Switch# show ip dhcp relay information trusted-sources
All interfaces are trusted source of relay agent information option
Switch#
16-24 show ip dhcp relay information option-insert
This command is used to display the relay option insert configuration.
show ip dhcp relay information option-insert
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level