Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
175
clear ip dhcp snooping binding [MAC-ADDRESS] [IP-ADDRESS] [vlan VLAN-ID] [interface
INTERFACE-ID]
Parameters
MAC-ADDRESS
Specifies the MAC address to clear.
IP-ADDRESS
Specifies the IP address to clear.
vlan VLAN-ID
Specifies the VLAN ID to clear.
interface INTERFACE-ID
Specifies the interface to clear.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to clear the DHCP binding entry, including the manually configured binding entry.
Example
This example shows how to clear all snooping binding entries.
Switch# clear ip dhcp snooping binding
Switch#
17-6 renew ip dhcp snooping database
This command is used to renew the DHCP binding database.
renew ip dhcp snooping database URL
Parameters
URL
Specifies load the bind entry database from the URL and add the
entries to the DHCP snooping binding entry table.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Using this command will cause the system to load the bind entry database from a URL and add the
entries to the DHCP snooping binding entry table.