Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
19
Example
This example shows how to display fan, temperature, power availability and status information.
Switch#show environment
Detail Temperature Status:
Unit Temperature Descr/ID Current/Threshold Range
----- ------------------------------------------------------
1 Central Temperature/1 27C/11~79C
Status code: * temperature is out of threshold range
Detail Fan Status:
--------------------------------------------------------------
Right Fan 1 (OK) Right Fan 2 (OK)
Detail Power Status:
Unit Power Module Power Status
----- ---------------- -------------
1 Power 1 in-operation
Switch#
Display Parameters
Power status in-operation: The power rectifier is in normal operation.
failed: The power rectifier not working normally.
empty: The power rectifier is not installed.
2-12 show unit
This command is used to display information about system units.
show unit [UNIT-ID]
Parameters
UNIT-ID
(Optional) Specify the unit to display.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the system modules. If no option is specified, then all of units’
information will be displayed.