Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
236
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the status of DAI for a specific range of VLANs.
Example
This example shows how to display the statistics of packets that have been processed by DAI for VLAN
10.
Switch# show ip arp inspection statistics vlan 10
VLAN Forwarded Dropped DHCP Drops ACL Drops
----- --------- --------- ---------- ---------
10 21546 145261 145261 0
VLAN DHCP Permits ACL Permits Source MAC Failures
----- ------------ ----------- -------------------
10 21546 0 0
VLAN Dest MAC Failures IP Validation Failures
----- ----------------- ----------------------
10 0 0
Switch#
This example shows how to display the statistics of packets that have been processed by DAI for all
active VLANs.