Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
240
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the content of the inspection log buffer.
Example
This example shows how to display the inspection log-buffer.
Switch# show ip arp inspection log
Total log buffer size: 64
Interface VLAN Sender IP Sender MAC Occurrence
---------- -------- ------------- ----------------- --------------------------
eth1/0/1 100 10.20.1.1 00-20-30-40-50-60 1 (2013-12-28 23:08:66)
eth1/0/2 100 10.5.10.16 55-66-20-30-40-50 2 (2013-12-02 00:11:54)
eth1/0/3 100 10.58.2.30 10-22-33-44-50-60 1 (2013-12-30 12:01:38)
Total Entries: 3
Switch#
Display Parameters
Interface
The name of interface that logging occurred.
VLAN
The VLAN that logging occurred.
Sender IP
The logging ARP’s sender IP address.
Sender MAC
The logging ARP’s sender MAC address.
Occurrence
The counter of logging entries occurred and the last time of logging
entry occurred.