Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
264
29. GARP VLAN Registration Protocol (GVRP)
Commands
29-1 clear gvrp statistics
This command is used to clear the statistics for a GVRP port.
clear gvrp statistics {all | interface INTERFACE-ID [, | -]}
Parameters
all
Specifies to clear GVRP statistic counters associated with all
interfaces.
interface INTERFACE-ID [,|-]
Specifies the interfaces. Specify a single interface, a range of
interfaces separated by a hyphen, or a series of interfaces separated
by comma.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to clear the GVRP counters.
Example
This example shows how to clear statistics for all interfaces.
Switch# clear gvrp statistics all
Switch#
29-2 gvrp global
This command is used to enable the GVRP function globally and use the no command to disable the
GVRP function globally.
gvrp global
no gvrp global
Parameters
None.
Default
By default, this option is disabled.