Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
298
show interfaces [INTERFACE-ID [,|-]] counters [errors]
Parameters
errors
(Optional) Specifies to display the error counters.
INTERFACE-ID
(Optional) Specifies that the interface can be a physical port. If no
interface is specified, the counters on all interfaces will be displayed.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command allows the user to display switch port statistics counters.
Example
This example shows how to display switch port counters on ports 1 to 8.