Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
345
40-6 show channel-group
This command is used to display the channel group information.
show channel-group [channel [CHANNEL-NO] {detail | neighbor} | load-balance | sys-id]
Parameters
CHANNEL-NO
(Optional) Specifies the channel group ID.
channel
(Optional) Specifies to display information for the specified port-
channels.
detail
(Optional) Specifies to display detailed channel group information.
neighbor
(Optional) Specifies to display neighbor information.
load-balance
(Optional) Specifies to display the load balance information.
sys-id
(Optional) Specifies to display the system identifier that is being used
by LACP.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If a port-channel number is not specified, all port-channels will be displayed. If the channel, load-balance
and sys-id keywords are not specified with the show channel-group command, only summary channel-
group information will be displayed.
Example
This example shows how to display the detailed information of all port-channels.