Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
346
Switch# show channel-group channel detail
Flag:
S - Port is requesting Slow LACPDUs F - Port is requesting fast LACPDU
A - Port is in active mode P - Port is in passive mode
LACP state:
bndl: Port is attached to an aggregator and bundled with other ports.
hot-sby: Port is in a hot-standby state.
indep: Port is in an independent state(not bundled but able to switch data
traffic)
down: Port is down
Channel Group 1
Member Ports: 2, Maxports = 12, Protocol: LACP
LACP Port Port
Port Flags State Priority Number
-------------------------------------------------
eth1/0/10 SA bndl 32768 10
eth1/0/11 SA bndl 32768 11
Channel Group 2
Member Ports: 2, Maxports = 12, Protocol: Static
LACP Port Port
Port Flags State Priority Number
--------------------------------------------------
eth3/0/8 N/A bndl N/A N/A
eth3/0/9 N/A down N/A N/A
Switch#
This example shows how to display the neighbor information for port-channel 3.
Switch# show channel-group channel 3 neighbor
Flag:
S - Port is requesting Slow LACPDUs, F - Port is requesting Fast LACPDUs,
A - Port is in Active mode, P - Port is in Passive mode,
Channel Group 3
Partner Partner Partner Partner
Port System ID PortNo Flags Port_Pri.
-------------------------------------------------------------------
eth1/0/1 32768,00-07-eb-49-5e-80 12 SP 32768
eth1/0/2 32768,00-07-eb-49-5e-80 13 SP 32768
Switch#
This example shows how to display the load balance information for all channel groups.