Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
376
inserted due to insufficient resources.
Total Ageouts
Total number of times a complete remote data entry was deleted
because the Time to Live interval expired.
41-26 show lldp traffic interface
This command is used to display the each physical interface’s LLDP traffic information.
show lldp traffic interface INTERFACE-ID [, | -]
Parameters
INTERFACE-ID
Specifies the interface ID.
,
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces before and after the
comma.
-
(Optional) Specifies a range of interfaces. No spaces before and after
the hyphen.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays LLDP traffic on each physical interface.
Example
This example shows how to display statistics information of port 1.
Switch#show lldp traffic interface ethernet 1/0/1
Port ID : eth1/0/1
---------------------------------------------
Total Transmits : 0
Total Discards : 0
Total Errors : 0
Total Receives : 0
Total TLV Discards : 0
Total TLV Unknows : 0
Total Ageouts : 0
Switch#
Display Parameters