Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
406
Switch# show ipv6 mld snooping mrouter
VLAN Ports
----- -----------------------------
1 T1 (dynamic)
10 2/0/48 (static)
T1 (dynamic)
4094 1/0/12 (forbidden)
T1 (dynamic)
Total Entries: 3
Switch#
45-19 show ipv6 mld snooping static-group
This command is used to display MLD snooping static group information on the Switch.
show ipv6 mld snooping static-group [GROUP-ADDRESS | vlan VLAN-ID]
Parameters
GROUP-ADDRESS
Specifies the group IPv6 address to be displayed.
vlan VLAN-ID
Specifies the VLAN ID to be displayed.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the MLD snooping static group information.
Example
This example shows how to display MLD snooping static group information .