Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
434
Assigned VID
Effectively assigned VLAN ID that was authorized after the host
passed authentication.
Assigned Priority
Effectively assigned priority that was authorized after the host passed
authentication.
Assigned Ingress Bandwidth
Effectively assigned ingress that was authorized after the host passed
authentication.
Assigned Egress Bandwidth
Effectively assigned egress that was authorized after the host passed
authentication.
Method
The Authentication method, such as 802.1X, MAC-Auth, Web-Auth,
JWAC, etc…
State
The method authentication state.
Authenticating – Host is under authentication by this method.
Success – Host pass this method authentication.
Selected – This method’s authentication result is taken and parsed by
system for the host.
Failure – Host fail at this method authentication.
No Information – Authentication info is unavailable.
Aging Time/Block Time Aging Time: Specifies a time period during which an authenticated
host will be kept in an authenticated state. When the aging time has
timed-out, the host will be moved back to an unauthenticated state.
Blocked Time: If a host fails to pass the authentication, the next
authentication will not start within the block time unless the user clears
the entry state manually.
Idle Time Idle Time: Indicates the leftover time of an authenticated session that
will be terminated if the session sustains no activity for the configured
period of time. It is only available for WEB sessions.
802.1X Authenticator State
Indicates the 802.1X authenticator PAE state: It can be one of the
following values:
INITIALIZE - Indicates the authenticator is initializing the state
machine and ready to authenticate the supplicant.
DISCONNECTED - Indicates that the state machine initialization has
finished, but no supplicant connects to this port.
CONNECTING - Indicates that the Switch has detected a supplicant
connecting to this port. The PAE will attempt to establish
communication with a supplicant.
AUTHENTICATING - Indicates that a supplicant is being
authenticated.
AUTHENTICATED - Indicates that the Authenticator has successfully
authenticated the supplicant.
ABORTING - Indicates that the authentication procedure is being
prematurely aborted due to the receipt of a re-authentication request,
an EAPOL-Start frame, an EAPOL-Logoff frame, or an authentication
timeout.
HELD - Indicates that the state machine ignores and discards all
EAPOL packets in order to discourage brute force attacks. This state is
entered from the AUTHENTICATING state following an authentication
failure.
FORCE_AUTH - Indicates that the supplicant is always authorized.
FORCE_UNAUTH - Indicates that the supplicant is always
unauthorized.
802.1X Backend State
Indicates the 802.1X backend PAE state. It can be one of the following