Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
492
Switch# show class-map
Class Map match-any class-default
Match any
Class Map match-all c2
Match protocol ip
Class Map match-all c3
Match access-group acl_home_user
Switch#
53-23 show mls qos aggregate-policer
This command is used to display the configured aggregated policer.
show mls qos aggregate-policer [NAME]
Parameters
NAME
(Optional) Specifies the name of the aggregate policer.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the configured aggregated policer.
Example
This example shows how to display the aggregate policer.
Switch# show mls qos aggregate-policer
mls qos aggregate-policer agg-policer5 10 1000 conform-action transmit exceed-action
drop
mls qos aggregate-policer agg-policer5 cir 500 bc 10 pir 1000 be 10 conform-action
transmit exceed-action set-dscp-transmit 2 violate-action drop
Switch#
53-24 show mls qos interface
This command is used to display port level QoS configurations.