Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
497
Switch# show mls qos map dscp-mutation
DSCP Mutation: mutemapl
Attaching interface:
eth1/0/1-10,eth2/0/1-5
0 1 2 3 4 5 6 7 8 9
--------------------------------
00 00 01 02 03 04 05 06 07 08 09
10 10 11 12 13 14 15 16 17 18 19
20 20 21 22 23 24 25 26 27 28 29
30 30 31 32 33 34 35 36 37 38 39
40 40 41 42 43 44 45 46 47 48 49
50 50 51 52 53 54 55 56 57 58 59
60 60 61 62 63
Switch#
53-26 show mls qos queueing
This command is used to display the QoS queuing information and weight configuration for different
scheduler algorithm on specified interface(s).
show mls qos queuing [interface INTERFACE-ID [, | -]]
Parameters
interface INTERFACE-ID
(Optional) Specifies the interface ID on which the weight configuration
of different scheduler.
,
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and after
the comma.
-
(Optional) Specifies a range of interfaces. No space is allowed before
and after the hyphen.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
When the optional keyword Interface is entered, the weight configuration for different scheduler (WRR or
WDRR) on the specified interface(s) will be displayed. If the interface is not specified, only the system-
wide map of CoS to queue ID is displayed.
The scheduling mode which is configured by the mls qos scheduler command determines which weight
configuration taking effect. Use the show mls qos interface scheduler command to get the scheduling
mode of an interface.