Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
539
Parameters
INTERFACE-ID
(Optional) Specifies the interface ID. If no interface is specified, then all
ports will be displayed.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the per port trap sending state.
Example
This example shows how to display the trap sending state for ports eth1/0/1 to eth1/0/9.
Switch# show snmp-server trap-sending interface eth1/0/1-1/0/9
Port Trap Sending
------- -------------
eth1/0/1 Enabled
eth1/0/2 Enabled
eth1/0/3 Disabled
eth1/0/4 Enabled
eth1/0/5 Enabled
eth1/0/6 Disabled
eth1/0/7 Enabled
eth1/0/8 Enabled
eth1/0/9 Enabled
Switch#
59-4 snmp-server
This command is used to enable the SNMP agent. Use the no command to disable the SNMP agent.
snmp-server
no snmp-server
Parameters
None.
Default
By default, this option is disabled.
Command Mode