Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
560
By default, the Switch role is candidate.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
There are 3 roles in the single IP management system: Candidate, Commander and Member.
The roles of Candidate and Commander can be specified by the user. The Member role can be specified
by the command sim group-member on the commander switch.
The SIM group consists of the Commander switch and many member switches If the switch roles change,
like Commander to Candidate, all of the members in the SIM group will be changed to Candidate.
Example
This example shows how to create a single IP management group.
Switch# configure terminal
Switch(config)# sim role commander my-group
Switch(config)#
60-3 sim group-member
This command is used to add one Candidate switch to the single IP management group. Use no form to
remove one member from this single IP management group.
sim group-member CANDIDATE-ID [PASSWORD]
no sim group-member MEMBER-ID
Parameters
CANDIDATE-ID
Specifies one Candidate switch in one SIM group.
MEMBER-ID
Specifies one Member switch in one SIM group.
PASSWORD
Specifies the password of the Candidate switch.
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
On the Commander switch, the Candidate switch can be joined to the group and it will be changed to the
member switch. The Commander switch must pass the Candidate switch Level-15 password
authentication.
Example