Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
563
Switch# configure terminal
Switch(config)# sim management vlan 100
Switch(config)#
60-7 sim remote-config
This command is used to remotely login and configure the single IP management group member or exit
from the remote configuration.
sim remote-config {member MEMBER-ID | exit}
Parameters
MEMBER-ID
Specifies the member that login.
exit
Specifies to exit from the current configuring member.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
The SIM Commander switch can login to its group members and configure them by the member ID. This
command only can be used on the Commander switch.
Example
This example shows how to login the single IP management group member device.
Switch# sim remote-config member 1
Switch#
60-8 copy sim
This command is used to copy a file to single IP management group members.
copy sim SOURCE-URL DESTINATION-URL [member MEMBER-LIST]
Parameters
SOURCE-URL
Specifies the source URL to be uploaded to the server. The source
URL is located on the member switch. When the running configuration
is specified as the source URL, the purpose is to upload the running
configuration to the TFTP server. When the system log is specified as
source URL, the system log can be retrieved to the TFTP server.
DESTINATION-URL
Specifies the destination URL for the file download. The destination