Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
596
Level: 12.
Usage Guideline
The command is available for physical port and port-channel interface configuration.
The command takes effect for access ports or hybrid ports.
Use this command to enable the surveillance VLAN function for ports.
Both the surveillance vlan command in Global Configuration Mode and the surveillance vlan enable
command in Interface Configuration Mode need to be enabled for a port to start the surveillance VLAN
function.
When surveillance VLAN is enabled for a port, the port will be automatically learned as surveillance VLAN
untagged member, the received untagged surveillance packets will be forwarded to surveillance VLAN.
The received packets are determined as surveillance packets if the source MAC addresses of packets
comply with the organizationally unique identifier (OUI) addresses configured by the surveillance vlan
mac-address command.
Example
This example shows how to enable surveillance VLAN function on physical port eth1/0/1.
Switch# configure terminal
Switch(config)#interface eth1/0/1
Switch(config-if)#surveillance vlan enable
Switch(config-if)#
64-4 surveillance vlan mac-address
This command is used to add the user-defined surveillance device OUI. Use no form of this command to
delete the user-defined surveillance device OUI.
surveillance vlan mac-address MAC-ADDRESS MASK [component-type {vms | vms-client |
video-encoder | network-storage | other} description TEXT]
no surveillance vlan mac-address MAC-ADDRESS MASK
Parameters
MAC-ADDRESS
Specifies the OUI MAC address.
MASK
Specifies the OUI MAC address matching bitmask.
component-type
(Optional) Specifies surveillance components that could be auto-
detected by surveillance VLAN.
vms
(Optional) Specifies the surveillance components type as Video
Management Server (VMS).
vms-client
(Optional) Specifies the surveillance components type as VMS client.
video-encoder
(Optional) Specifies the surveillance components type as Video
Encoder.
network-storage
(Optional) Specifies the surveillance components type as Network
Storage.
other
(Optional) Specifies the surveillance components type as other IP
Surveillance Devices.
description TEXT
(Optional) Specifies the description for the user-defined OUI with a