Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
614
Command Default Level
Level: 15.
Usage Guideline
This command displays the current running system configuration.
Example
This example shows how to display the content of the running configuration file.
Switch#show running-config
Building configuration...
Current configuration : 32950 bytes
#-------------------------------------------------------------------------------
# DGS-1510-28P Gigabit Ethernet SmartPro Switch
# Configuration
#
# Firmware: Build 1.00.016
# Copyright(C) 2014 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------------------
# STACK
end
end
# DEVICE
configure terminal
end
# AAA
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
66-10 show startup-config
This command is used to display the content of the startup configuration file.
show startup-config
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode.