Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
620
discriminator
(Optional) Specifies to filter the message to the log server based on
discriminator.
port UDP-PORT
(Optional) Specifies the UDP port number to be used for the SYSLOG
server. Valid values are 514 (the IANA well-known port) or any value
from 1024 to 65535. If not specified, the default UDP port is 514.
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
System messages can be logged to the local message buffer, local console or remote hosts. Messages
must enter the local message buffer first before it can be further dispatched to logging server.
The following is a table for the facility.
Numerical code Facility
0 Kernel messages.
1 User-level messages.
2 Mail system.
3 System daemons.
4 Security/authorization messages.
5 Messages generated internally by the SYSLOG.
6 Line printer sub-system.
7 Network news sub-system.
8 UUCP sub-system.
9 Clock daemon.
10 Security/authorization messages.
11 FTP daemon.
12 NTP subsystem.
13 Log audit.
14 Log alert.
15 Clock daemon (note 2).
16 Local use 0 (local0).
17 Local use 1 (local1).
18 Local use 2 (local2).
19 Local use 3 (local3).
20 Local use 4 (local4).
21 Local use 5 (local5).
22 Local use 6 (local6).