Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
653
show voice vlan {device | lldp-med device} [interface INTERFACE-ID [, | -]]
Parameters
interface
(Optional) Specifies to display voice VLAN information of ports.
INTERFACE-ID
(Optional) Specifies the interface to display.
,
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and after
the comma.
-
(Optional) Specifies a range of interfaces. No space is allowed before
and after the hyphen.
device
(Optional) Specifies to display the voice devices learned by OUI.
lldp-med device
(Optional) Specifies to display the voice devices learned by LLDP-
MED.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the voice VLAN configurations.
Example
This example shows how to display the voice VLAN global settings.