Owners manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
676
Log Message: MAC-based Access Control host login success (MAC: <mac-
address>, <interface-id>, VID: <vlan-id>).
Parameters description:
mac-address: The host MAC address
interface-id: The interface on which the host is authenticated
vlan-id: The VLAN ID on which the host exists
Event description: A host has aged out.
Log Message: MAC-based Access Control host aged out (MAC: <mac-address>,
<interface-id>, VID: <vlan-id>).
Parameters description:
mac-address: The host MAC address
interface-id: The interface on which the host is authenticated
vlan-id: The VLAN ID on which the host exists
Informational
Event description: A host failed to pass the authentication.
Log Message: MAC-based Access Control host login fail (MAC: <mac-address>,
<interface-id>, VID: <vlan-id>).
Parameters description:
mac-address: The host MAC address
interface-id: The interface on which the host is authenticated
vlan-id: The VLAN ID on which the host exists
Critical
Event description: The authorized user number on the whole device has reached
the maximum user limit.
Log Message: MAC-based Access Control enters stop learning state.
Warning
Event description: The authorized user number on the whole device is below the
maximum user limit in a time interval.
Log Message: MAC-based Access Control recovers from stop learning state.
Warning
Event description: The authorized user number on an interface has reached the
maximum user limit.
Log Message: <interface-id> enters MAC-based Access Control stop learning
state.
Parameters description:
interface-id: The interface on which the host is authenticated
Warning
Event description: The authorized user number on a interface is below the
maximum user limit in a time interval.
Log Message: <interface-id> recovers from MAC-based Access Control stop
learning state.
Parameters description:
interface-id: The interface on which the host is authenticated
Warning
MSTP Debug Enhancement
Log Description Severity
Event description: Used to record the event that Spanning Tree Protocol is
enabled.
Log Message: Spanning Tree Protocol is enabled
Informational
Event description: Used to record the event that Spanning Tree Protocol is
disabled
Log Message: Spanning Tree Protocol is disabled.
Informational