System information

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
120
Operational East Port
Display the operational east port value.
Admin RPL Port Specify the RPL port used. Options to choose from are West Port, East Port, and
None.
Operational RPL Port
Display the operational RPL port value.
Admin RPL Owner
Specify to enable or disable the RPL owner node.
Operational RPL
Owner
Display the operational RPL owner value.
Protected VLAN(s)
Specify to add or delete the protected VLAN group.
Ring MEL (0-7)
Specify the ring MEL of the R-APS function. The default ring MEL is 1.
Holdoff Time (0-10000)
Specify the hold-off time of the R-APS function. The default hold-off time is 0
milliseconds.
Guard Time (10-20000)
Specify the guard time of the R-APS function. The default guard time is 500
milliseconds.
WTR Time (5-12)
Specify the WTR time of the R-APS function.
Revertive
Specify the state of the R-APS revertive option.
Current Ring State
Display the current Ring state.
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.
LLDP
LLDP
LLDP Global Settings
On this page the user can configure the LLDP global parameters.
To view the following window, click L2 Features > LLDP > LLDP > LLDP Global Settings, as show below:
Figure 4-85 LLDP Global Settings window
The fields that can be configured are described below:
Parameter Description
LLDP State
Click the radio buttons to enable or disable the LLDP feature.