System information

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
144
Figure 6-11 DSCP Map Settings - DSCP Color window
The fields that can be configured are described below:
Parameter Description
From Port / To Port
Use the drop-down menu to select a range of port to configure.
DSCP Map
Use the drop-down menu to select one of two options:
DSCP Priority – Specify a list of DSCP values to be mapped to a specific priority.
DSCP DSCP – Specify a list of DSCP value to be mapped to a specific DSCP.
DSCP Color - Specify a list of DSCP value to be mapped to a specific color.
DSCP List (0-63)
Enter a DSCP List value.
Priority
Use the drop-down menu to select a Priority value. This appears when selecting
DSCP Priority in the DSCP Map drop-down menu.
DSCP (0-63) Enter a DSCP value. This appears when selecting DSCP DSCP in the DSCP Map
drop-down menu.
Port Use the drop-down menu to select a port. This appears when selecting DSCP
DSCP in the DSCP Map drop-down menu.
Color
Use the drop-down menu to select the result color of the mapping. This appears
when selecting DSCP Color in the DSCP Map drop-down menu.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Scheduling Settings
QoS Scheduling
This window allows the user to configure the way the Switch will map an incoming packet per port based on its
802.1p user priority, to one of the eight available hardware priority queues available on the Switch.