System information

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
257
The window is used to create the static host name entry of the switch.
To view this window, click Network Application > DNS Resolver > DNS Resolver Static Host Name Settings as
shown below:
Figure 9-14 DNS Resolver Static Host Name Settings window
The fields that can be configured are described below:
Parameter Description
Host Name
Enter the name of the host.
IP Address
Click the radio button and enter the IPv4 address of the host here.
IPv6 Address
Click the radio button and enter the IPv6 address of the host here.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
DNS Resolver Dynamic Host Name Table
This window displays the current host name entries.
To view this window, click Network Application > DNS Resolver > DNS Resolver Dynamic Host Name Table as
shown below:
Figure 9-15 DNS Resolver Dynamic Host Name Table window
PPPoE Circuit ID Insertion Settings
This window is used to configure the PPPoE circuit ID insertion function.
To view this window, click Network Application > PPPoE Circuit ID Insertion Settings as shown below: