System information

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
300
IPv4
Click the radio button to enter the TFTP server IP address used.
IPv6
Click the radio button to enter the TFTP server IPv6 address used.
Domain Name
Click the radio button to enter the domain name.
Destination File
Enter the file name that will be stored in the TFTP server, e.g. runtime.had.
Source File
Enter the location of the Source File, e.g. C:/runtime.had.
Click Upload to initiate the upload.
Upload Firmware To FTP
This window is used to upload firmware from the Switch to a FTP Server.
Figure 12-8 Upload Firmware – FTP window
The fields that can be configured are described below:
Parameter Description
FTP Server IP
Enter the FTP Server IP Address used.
User Name
Enter the appropriate Username used.
Password
Enter the appropriate Password used.
TCP Port (1-65535)
Enter the TCP Port number used.
Destination File
Enter the file name that will be stored in the FTP server, e.g. runtime.had.
Source File
Enter the location of the Source File, e.g. C:/runtime.had.
Click Upload to initiate the upload.
Upload Firmware To HTTP
This window is used to upload firmware from the Switch to a HTTP server.
Figure 12-9 Upload Firmware – HTTP window
The fields that can be configured are described below: