System information

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
306
The fields that can be configured are described below:
Parameter Description
FTP Server IP
Enter the FTP Server IP Address used.
User Name
Enter the appropriate Username used.
Password
Enter the appropriate Password used.
TCP Port
Enter the TCP Port number used.
Destination File
Enter the file name that will be stored in the FTP server, e.g. log.log.
Log Type
Select the type of log to be transferred. Selecting the Common Log option here will
upload the common log entries. Selecting the Attack Log option here will upload the log
concerning attacks.
Click Upload to initiate the upload.
Upload Log To HTTP
This window is used to upload the log file from the Switch to a computer.
Figure 12-18 Upload Log – HTTP window
The fields that can be configured are described below:
Parameter Description
Log Type Select the type of log to be transferred. Selecting the Common Log option here will
upload the common log entries. Selecting the Attack Log option here will upload the
log concerning attacks.
Click Upload to initiate the upload.
Reset
The Reset function has several options when resetting the Switch. Some of the current configuration parameters
can be retained while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default parameters into the Switch's non-
volatile RAM, and then restart the Switch. All other options enter the factory defaults into the
current configuration, but do not save this configuration. Reset System will return the Switch's
configuration to the state it was when it left the factory
Reset gives the option of retaining the Switch's IP address, log, user account and banner, while resetting all other
configuration parameters to their factory defaults. If the Switch is reset using this window, and the Save option is
not executed, the Switch will return to the last saved configuration when rebooted.
To view this window, click Tools > Reset, as shown below.