Manualshelf

System information

ManualsBrandsD-Link ManualsNetworkingDGS-3000-10TC
61626364656667686970
DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
54
Figure 3-44 LED State Settings window
The fields that can be configured are described below:
Parameter Description
LED State
Click the radio buttons to enable or disable the port LED state.
Click the Apply button to accept the changes made.
Power Saving Settings
This window allows the user to implement the Switch’s built-in power saving features and set the schedule to
enforce the settings.
To view the following window, click Management > Power Saving > Power Saving Settings, as shown below:
Figure 3-45 Power Saving Settings window
The fields that can be configured are described below:
Parameter Description
Power Saving Mode
Link Detection State
Click the radio buttons to enable or disable the link detection state. When enabled, a
port which has a link down status will be turned off to save power to the Switch. This
will not affect the port’s capabilities when the port status is link up.
Power Saving Mode
Length Detection State
Click the radio buttons to enable or disable length detection state. When enabled, the
Switch will automatically determine the length of the cable and adjust the power flow
accordingly.
Power Saving Mode
LED State
Click the radio buttons to enable or disable LED state. When enabled, the LED’s
state of ports will be turned off during the configured time range.
Power Saving Mode
Port State
Click the radio buttons to enable or disable port state. When enabled, the ports will
be shut down during the configured time range.
Power Saving Mode
Hibernation State
Click the radio buttons to enable or disable hibernation state. When enabled, the
Switch will go into a low power state and be idle during the configured time range. It
will shut down all the ports, all network function (telnet, ping, etc.) will not work, and
only the console connection will work via the RS232 port. If the Switch is an endpoint
type PSE (Power Sourcing Equipment), it will not provide power to the port.
Action
Use the drop down menu to add or delete the schedule.