System information

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide

Figure 4-12 MAC-based VLAN Settings

The fields that can be configured are described below:

Parameter Description

MAC Address

Specify the MAC address.

VID (1-4094)

Select this option and enter the VLAN ID.

VLAN Name

Select this option and enter the VLAN name of a previously configured VLAN.

Click the Find button to locate a specific entry based on the information entered.

Click the Add button to add a new entry based on the information entered.

Click the View All button to display all the existing entries.

Click the Delete All button to remove all the entries listed.

Click the Delete button to remove the specific entry.

Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Private VLAN Settings

A private VLAN is comprised of a primary VLAN, up to one isolated VLAN, and a number of community VLANs. A

private VLAN ID is presented by the VLAN ID of the primary VLAN. The command used to associate or de-

associate a secondary VLAN with a primary VLAN.

A secondary VLAN cannot be associated with multiple primary VLANs. The untagged member port of the primary

VLAN is named as the promiscuous port. The tagged member port of the primary VLAN is named as the trunk port.

A promiscuous port of a private VLAN cannot be promiscuous port of other private VLANs. The primary VLAN

member port cannot be a secondary VLAN member at the same time, or vice versa. A secondary VLAN can only

have the untagged member port. The member port of a secondary VLAN cannot be member port of other

secondary VLAN at the same time. When a VLAN is associated with a primary VLAN as the secondary VLAN, the

promiscuous port of the primary VLAN will behave as the untagged member of the secondary VLAN, and the trunk

port of the primary VLAN will behave as the tagged member of the secondary VLAN. A secondary VLAN cannot be

specified with advertisement. Only the primary VLAN can be configured as a layer 3 interface. The private VLAN

member port cannot be configured with the traffic segmentation function.

This window allows the user to configure the private VLAN parameters.

To view the following window, click L2 Features > VLAN > Private VLAN Settings, as shown below: