Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
100
enable gvrp
Purpose Used to enable GVRP on the Switch.
Syntax
enable gvrp
Description
This command, along with disable gvrp below, is used to enable
and disable GVRP on the Switch, without changing the GVRP
configuration on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the generic VLAN Registration Protocol (GVRP):
DGS3048#enable gvrp
Command: enable gvrp
Success.
DGS3048#
disable gvrp
Purpose Used to disable GVRP on the Switch.
Syntax
disable gvrp
Description
This command, along with enable gvrp above, is used to enable
and disable GVRP on the Switch, without changing the GVRP
configuration on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):
DGS3048#disable gvrp
Command: disable gvrp
Success.
DGS3048#
show vlan
Purpose Used to display the current VLAN configuration on the Switch
Syntax
show vlan {<vlan_name 32>}
Description This command displays summary information about each VLAN
including the VLAN ID, VLAN name, the Tagging/Untagging status,
and the Member/Non-member/Forbidden status of each port that is a