Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
101
show vlan
member of the VLAN.
Parameters
<vlan_name 32> − The VLAN name of the VLAN for which to display
a summary of settings.
Restrictions None.
Example usage:
To display the Switch’s current VLAN settings:
DGS3048#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN TYPE : static Advertisement : Enabled
Member ports : 1-24
Static ports : 1-24
Untagged ports : 1-24g
Forbidden ports :
Total Entries : 1
DGS3048#
show gvrp
Purpose Used to display the GVRP status for a port list on the Switch.
Syntax
show gvrp {<portlist>} | ch1 | ch2 | ch3 | ch4 | ch5 | ch6 | ch7 |
ch8 ]}
Description This command displays the GVRP status for a port list on the Switch
Parameters
<portlist> − Specifies a port or range of ports for which the GVRP status
is to be displayed.
<ch1-8> −
assigns ports to a port-channel.
Restrictions None.
Example usage:
To display GVRP port status:
DGS3048#show gvrp 1-5
Command: show gvrp 1-5
Global GVRP : Disabled
Port PVID GVRP Ingress Checking Acceptable Frame Type
------ ---- -------- ---------------- ---------------------------
1 1 Disabled Enabled All Frames
2 1 Disabled Enabled All Frames
3 1 Disabled Enabled All Frames
4 1 Disabled Enabled All Frames
5 1 Disabled Enabled All Frames
Total Entries : 5