Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
105
show link_aggregation
Purpose Used to display the current link aggregation configuration on the Switch.
Syntax
show link_aggregation {group_id <value 1 - 8> }
Description This command will display the current link aggregation configuration of the
Switch.
Parameters
group_id <value 1- 8> − Specifies the group ID. The Switch allows up to 8
link aggregation groups to be configured. The group number identifies each
of the groups.
Restrictions None.
Example usage:
To display Link Aggregation configuration:
DGS3048#show link_aggregation
Command: show link_aggregation
Group ID : 1
Member Port : 5-7,9
Active Port :
Status : Disabled
DGS3048#