Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
121
config 802.1x reauth
Purpose Used to configure the 802.1x re-authentication feature of the Switch.
Syntax
config 802.1x reauth [port_based ports [<portlist> | all]
Description
The config 802.1x reauth command is used to re-authenticate a previously
authenticated device based on a port number.
Parameters port_based – This instructs the Switch to re-authorize 802.1x function
based only on the port number. Ports approved for re-authorization can
then be specified.
 ports <portlist> − Specifies a port or range of ports to be
reauthorized.
 all − Specifies all of the ports on the Switch to be reauthorized.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure 802.1x reauthentication for ports 1-18:
DGS3048#config 802.1x reauth port_based ports 1-18
Command: config 802.1x reauth port_based ports 1-18
Success.
DGS3048#