Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
87
config scheduling
specified. The default value is 0.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure traffic scheduling:
DGS30484# config scheduling 7 max_packet 15
Command: config scheduling 7 max_packet 15
Success.
DGS30484#
show scheduling
Purpose Used to display the currently configured traffic scheduling on the
Switch.
Syntax
show scheduling
Description
The show scheduling command displays the current configuration
for the maximum number of packets (max_packet) value assigned
to the eight priority classes of service on the Switch. The Switch will
empty the eight hardware classes of service in order, from the
highest priority (class 7) to the lowest priority (class 0).
Parameters None.
Restrictions None.
Example usage:
To display the current scheduling configuration:
DGS3048# show scheduling
QOS Output Scheduling
MAX. Packet
---------------------------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
Class-7 8