Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
90
config 802.1p default_priority
Parameters
<portlist> − Specifies a port or range of ports to be configured.
all − Specifies that the config 802.1p default_priority command
will be applied to all ports on the Switch.
<priority 0-7> − Specifies the 802.1p priority value that an untagged,
incoming packet will be given before being forwarded to its
destination.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure 802.1p default priority on the Switch:
DGS3048#config 802.1p default_priority all 5
Command: config 802.1p default_priority all 5
Success.
DGS3048#