Specifications

DGS-3048 Layer 2 Switch CLI Reference Manual
93
To show the scheduling mechanism:
DGS3048#show scheduling_mechanism
Command: show scheduling_mechanism
QOS scheduling_mechanism
CLASS ID Mechanism
----------- -----------
Class-0 strict
Class-1 strict
Class-2 strict
Class-3 strict
Class-4 strict
Class-5 strict
Class-6 strict
Class-7 strict
DGS3048#
config rate_limit
Purpose To enable rate limitation of specific egress port
Syntax
config rate_limit[<portlist> | all] <value 1-1000000>
Description The command enables setting of rate limitation of egress port
Parameters
<portlist> − Specifies a port or range of ports to be set
<value 3500-1000000> Specifies the rate limit range.
Restrictions None
Example Usage:
To configure a rate limit of an egress port:
DGS3048# config rate_limit all
Command: config rate_limit all
<3500-1000000> rate
DGS3048#
show rate_limit
Purpose To show the rate limit of specific egress ports.
Syntax
show rate_limit[<portlist> | all] <value 1-1000000>
Description This command will display the rate limit of an egress port
Parameters
<portlist> − Specifies a port or range of ports.
<value 1-1000000> − Specifies the rate limit range.
Restrictions None
Example Usage: