System information

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
133
Parameter Description
MBA Global State
Toggle to globally enable or disable the MAC-based Access Control function on the
Switch.
Method
Use this drop-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local – Use this method to utilize the locally set MAC address database as the
authenticator for MAC-based Access Control. This MAC address list can be
configured in the MAC-based Access Control Local Database Settings window.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for
MAC-based Access Control. Remember, the MAC list must be previously set on the
RADIUS server and the settings for the server must be first configured on the Switch.
Password
Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is “default”.
Guest VLAN Name
Enter the name of the previously configured Guest VLAN being used for this function.
Guest VLAN Member Ports
(e.g.: 1-5, 9)
Enter the list of ports that have been configured for the Guest VLAN.
Guest VLAN ID (1-4904)
Click the button and enter a Guest VLAN ID.
From Port
The beginning port of a range of ports to be configured for MAC-based Access
Control.
To Port
The ending port of a range of ports to be configured for MAC-based Access Control.
State
Use this drop-down menu to enable or disable MAC-based Access Control on the port
or range of ports selected in the Port Settings section of this window.
Mode
Toggle between Port Based and Host Based.
Aging Time (1-1440)
Enter a value between 1 and 1440 minutes. The default is 1440.
Hold Time (1-300)
Enter a value between 1 and 300 seconds. The default is 300.
Click Apply to implement the configuration changes.