System information

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
139
hours).
State
Use this drop-down menu to enable the configured ports as WAC ports.
Idle Time (1-1440)
If there is no traffic during the Idle Time parameter, the host will be moved back to the
unauthenticated state. Enter a value between 0 and 1440 minutes. A value of 0 indicates the
Idle state of the authenticated host on the port will never be checked. The default value is
infinite.
Block Time (0-300)
This parameter is the period of time a host will be blocked if it fails to pass authentication.
Enter a value between 0 and 300 seconds. The default value is 30 seconds.
Click Apply to implement changes made.
JWAC
The JWAC folder contains five windows: JWAC Global Settings, JWAC Port Settings, JWAC User Settings, JWAC
Customize Page Language, and JWAC Customize Page.
JWAC Global Settings
Users can enable and configure Japanese Web-based Access Control on the Switch. Please note that JWAC and Web
Authentication are mutually exclusive functions. That is, they cannot be enabled at the same time. To use the JWAC feature,
computer users need to pass through two stages of authentication. The first stage is to do the authentication with the quarantine
server and the second stage is the authentication with the Switch. For the second stage, the authentication is similar to Web
Authentication, except that there is no port VLAN membership change by JWAC after a host passes authentication. The RADIUS
server will share the server configuration defined by the 802.1X command set.
To view the following window, click Security > JWAC > JWAC Global Settings:
Figure 5 - 49. JWAC Global Settings window
To set the Web authentication for the Switch, complete the following fields:
Parameter Description
JWAC State
Use this drop-down menu to either enable or disable JWAC on the Switch.
JWAC Configuration
Virtual IP
This parameter specifies the JWAC Virtual IP address that is used to accept authentication
requests from an unauthenticated host. The Virtual IP address of JWAC is used to accept
authentication requests from an unauthenticated host. Only requests sent to this IP will get a