System information

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
154
To view the setting details for a created profile, click the Show Details button for the corresponding entry on the Access Profile
List window, revealing the following window:
Figure 6 - 7. Access Profile Detail Information window for IPv6
The window shown below is the Add ACL Profile window for Packet Content:
Figure 6 - 8. Add ACL Profile window for Packet Content
The following parameters can be set for the Packet Content type:
Parameter Description
Select Profile ID
Use the drop-down menu to select a unique identifier number for this profile set. This value
can be set from 1 to 200.
Select ACL Type
Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet
content. This will change the window according to the requirements for the type of profile.
Select Ethernet ACL to instruct the Switch to examine the layer 2 part of each packet header.
Select IPv4 ACL to instruct the Switch to examine the IPv4 address in each frame's header.
Select IPv6 ACL to instruct the Switch to examine the IPv6 address in each frame's header.
Select Packet Content to instruct the Switch to examine the packet content in each frame’s
header.